A thermal mass flow meter is an instrument used to measure the flow rate of a fluid by utilizing the heat transfer principle

It works by measuring the heat transfer from a heated sensor to the flowing fluid. The flow rate is directly proportional to the amount of heat absorbed by the fluid.

Thermal mass flow meters offer high accuracy, wide turndown ratio, and low pressure drop. They are also suitable for a wide range of applications and are not affected by changes in temperature and pressure.

A vortex flow meter is a device used to measure the flow rate of liquids, gases, and steam in a variety of industrial applications.

Vortex flow meters work on the principle of the von Kármán effect, where a fluid passing by a bluff body creates alternating vortices. The frequency of these vortices is directly proportional to the flow rate.

Some advantages of vortex flow meters include their ability to measure a wide range of flow rates, low maintenance requirements, and suitability for a variety of fluid types.

An electromagnetic flow meter is a device used to measure the flow of electrically conductive liquids, such as water and wastewater, in a pipe or conduit.

An electromagnetic flow meter works on the principle of Faraday's law of electromagnetic induction, where a magnetic field is applied to the flowing liquid and the resulting voltage is measured to determine the flow rate.

Electromagnetic flow meters offer high accuracy, minimal pressure loss, no moving parts in the flow stream, and can measure flow in both clean and dirty liquids.

A turbine flow meter is a device that measures the rate of flow of a liquid or gas by using a rotor to spin as the substance passes through it.

The turbine flow meter works on the principle of the fluid flowing through the meter, causing the rotor to spin. The rotation of the rotor is then translated into a flow rate measurement.

Turbine flow meters are commonly used in industries such as oil and gas, chemical, pharmaceutical, and water treatment to measure the flow of liquids and gases accurately.

An oval gear flow meter is a type of positive displacement flow meter that measures the flow rate of a liquid by counting the number of revolutions of oval-shaped gears.

Oval gear flow meters offer high accuracy, reliability, and repeatability. They are also suitable for measuring viscous and corrosive liquids.

An oval gear flow meter operates by allowing the liquid to flow through the gears, causing them to rotate. The rotation is then measured to determine the flow rate.

An ultrasonic level transmitter is a device used to measure the level of a liquid or solid within a container using ultrasonic sound waves.

The transmitter emits ultrasonic pulses that travel to the surface of the material being measured and then bounce back to the sensor. The time it takes for the pulse to return is used to calculate the level of the material.

Ultrasonic level transmitters are non-contact, easy to install, and suitable for a wide range of applications. They are also unaffected by the color, transparency, or chemical properties of the material being measured.

A capacitance level transmitter is a device used to measure the level of a material in a vessel or tank by detecting the change in capacitance between the probe and the vessel wall.

The transmitter uses the principle of capacitance to measure the level of a material. It generates an electrical signal that varies with the level of the material in the vessel.

Capacitance level transmitters are highly accurate, suitable for a wide range of materials, and can operate in harsh environments. They are also easy to install and maintain.